+44 7428 131 569
Instagramfacebooktwitteryoutube
Belling Oven Error Codes — Complete Guide (UK) | London Appliance Repair

Belling Oven Error Codes — Complete Guide (UK) | London Appliance Repair

November 01, 20250 Comments

Belling Oven Error Codes: Complete Guide to Fixing Common Cooker Faults in London

Belling ovens are reliable and popular British-made appliances, but like all electrical cookers, they can show error codes when something goes wrong. These codes help identify problems such as temperature sensor faults, overheating, or door lock issues. Below, you’ll find a complete list of Belling oven error codes, what they mean, and how to fix them.

Common Belling Oven Error Codes and Fixes

ERR1 – Communication Fault

  • Meaning: Communication failure between the UM (user module) and PM (power module).
  • Fix: Turn off the power for 10 minutes and check the wiring connections between the control boards. If the issue persists, the control board may need servicing or replacement.

ERR2 – Oven Temperature Sensor Fault

  • Meaning: The oven temperature sensor (thermistor) is open or disconnected.
  • Fix: Unplug the oven, test the temperature probe with a multimeter, and replace it if the resistance reading is abnormal.

ERR3 – Temperature Circuit Fault

  • Meaning: Similar to ERR2, but refers to a different circuit or oven cavity (often in double ovens).
  • Fix: Check both temperature sensors and their wiring.

ERR4 – Front Panel Overheat

  • Meaning: The front control panel area has exceeded the maximum temperature.
  • Fix: Ensure the cooling fan is working properly, and air vents are not blocked.

ERR5 – Power Module Overheat

  • Meaning: The main power board temperature has risen too high.
  • Fix: Turn off the oven, let it cool, and inspect the power board and fan. Replace the board if necessary.

ERR6 – UM Temperature Sensor Fault

  • Meaning: The user module temperature sensor is faulty.
  • Fix: Replace the UM temperature sensor after confirming connection integrity.

ERR7 – PM Temperature Sensor Fault

  • Meaning: The power module temperature sensor is faulty.
  • Fix: Replace the PM sensor or check wiring to the power module.

ERR8 – Temperature Setting / Heating Fault

  • Meaning: The temperature cannot be controlled properly due to a faulty element or wiring.
  • Fix: Test oven elements and terminals. Replace damaged elements or connectors.

F1 – Temperature Sensor Open Circuit

  • Meaning: Faulty or disconnected temperature probe.
  • Fix: Switch off the oven, test the probe, and replace it if damaged.

F2 – Overheating Detected

  • Meaning: The oven temperature exceeded safe levels.
  • Fix: Check the cooling fan, thermostat, and ventilation. Allow to cool down fully before reuse.

F3 – Heating Element Failure

  • Meaning: The heating element is not responding.
  • Fix: Verify power supply, then test and replace the heating element if needed.

F4 – Communication Error

  • Meaning: Control board and display are not communicating.
  • Fix: Power cycle the oven; if error persists, the main board may need replacement.

F5 – Door Lock Fault

  • Meaning: Door lock mechanism or sensor is jammed.
  • Fix: Turn off power, avoid forcing the door, and contact a service engineer.

E2 – High Temperature / Thermostat Fault

  • Meaning: The oven is overheating, or the thermostat is defective.
  • Fix: Check the thermostat, temperature probe, and main board.

ER22 – Thermal Fuse or Overheat Fault

  • Meaning: Overheat protection has triggered, or thermal fuse is damaged.
  • Fix: Inspect and replace the thermal fuse or control board.

ER03 – Touchpad / Control Fault (for Induction Models)

  • Meaning: Stuck touchpad button or unsuitable cookware detected.
  • Fix: Clean the hob surface, restart the power, and ensure cookware is induction-compatible.


Safety Warning

If your Belling oven keeps displaying the same error code after resetting, do not continue using it. Continuous faults may lead to overheating or electrical hazards. Always unplug the oven and contact a qualified repair engineer.

Professional Belling Oven Repair in London

At London Appliance Repair, we fix all Belling oven and cooker models quickly and safely. Whether it’s an ERR1 communication issue or a F3 heating problem, our certified engineers can diagnose and repair it on the same day.

  • Same-day and next-day appointments available
  • Fully qualified London engineers
  • Genuine Belling replacement parts
  • Coverage across all London postcodes

Book your Belling oven repair in London today and get your cooker working like new again.

Free Booking