Complete guide to AEG washing machine error codes in London, including causes and fixes for common issues.
AEG Washing Machine Error Codes London – Complete Guide to Faults, Causes & Fixes
Washing Machine Repair Services in London
If your AEG washing machine has displayed an error code and you live in London or the surrounding areas, do not worry. This comprehensive guide covers AEG washing machine error codes with clear explanations, common causes, and step-by-step solutions. Whether you want to try basic troubleshooting yourself or need support from a local technician, this guide is here to help.
Why Does My AEG Washing Machine Display an Error?
Modern AEG washing machines are fitted with self-diagnosis systems that display an error code when a fault occurs, such as:
- Water intake or drainage problems
- Door lock not working properly
- Issues with the motor or heating element
- Problems with the power supply or electronics
Quick List of Error Codes
- E10 / E11 / E12 – Water intake issues
- E20 / E21 / E22 / E23 / E24 – Drainage problems
- E30 / E31 / E32 / E35 / E38 – Pressure sensor faults
- E40 / E41 / E42 / E43 / E44 / E45 – Door lock issues
- E50 / E51 / E52 / E53 – Motor faults
- E60 / E61 / E62 / E66 / E68 / E69 – Heating element problems
- EF0 / EF1 / EF2 / EF3 / EF4 / EF5 – Excess foam or unbalanced load
- EH0 / EH1 / EH2 / EH3 – Power supply issues
- E90 / E91 / E92 / E93 / E94 / E95 / E96 – Internal electronics communication errors
- EA0 / EA1 / EA2 – Drum position sensor errors
Detailed List of Error Codes, Causes & Solutions
E10 / E11 / E12: Water Intake Problems
Cause: These errors usually occur when the water intake is not working correctly.
Solution:
- Check that the water supply valve is fully open.
- Inspect the inlet hose for any kinks or blockages.
- Clean the water filter.
- Make sure the water pressure is sufficient.
E20 / E21 / E22 / E23 / E24: Drainage Problems
Cause: These errors usually mean that the machine cannot drain water properly.
Solution:
- Clean the drain filter to remove any debris.
- Check that the drain hose is not blocked or kinked.
- Make sure the drainage pipe is clear and positioned correctly.
- If the issue continues, the drain pump may need to be replaced.
E30 / E31 / E32 / E35 / E38: Pressure Sensor Faults
Cause: These errors point to problems with the pressure sensor or the water level inside the drum.
Solution:
- Check and clean the pressure sensor.
- Make sure there are no blockages in the hose connected to the pressure sensor.
- If the issue continues, the pressure sensor may need to be replaced.
E40 / E41 / E42 / E43 / E44 / E45: Door Lock Issues
Cause: These errors usually mean that the door lock is faulty or not engaging correctly.
Solution:
- Make sure the door is fully closed and the latch is engaged.
- Check the door lock mechanism for wear or damage.
- If the door lock mechanism is faulty, it may need to be replaced.
E50 / E51 / E52 / E53: Motor Issues
Cause: These errors usually indicate that the motor is not working correctly or there is a motor-related fault.
Solution:
- Check the motor for obstructions or debris.
- Make sure the motor wiring is intact.
- If the issue continues, the motor or motor control board may need to be replaced.
E60 / E61 / E62 / E66 / E68 / E69: Heating Element Problems
Cause: These errors occur when the washing machine’s heating element is faulty.
Solution:
- Test the heating element with a multimeter to check for continuity.
- If the heating element is damaged, replace it.
- Check the temperature sensor for faults.
EF0 / EF1 / EF2 / EF3 / EF4 / EF5: Excess Foam or Unbalanced Load
Cause: These errors often happen when too much detergent has been used or the load is uneven.
Solution:
- Reduce the amount of detergent used.
- Make sure the load is balanced inside the drum.
- Run the machine on a gentle spin cycle to redistribute the load.
EH0 / EH1 / EH2 / EH3: Power Supply Issues
Cause: These errors usually occur when there is a power supply issue, such as voltage fluctuations.
Solution:
- Unplug the machine from the power supply for a few minutes, then plug it back in.
- Check for any voltage fluctuations in the electrical supply.
- Use a surge protector to help prevent damage from power spikes.
E90 / E91 / E92 / E93 / E94 / E95 / E96: Internal Electronics Communication Errors
Cause: These errors indicate a communication issue within the washing machine’s control board.
Solution:
- Power cycle the washing machine by unplugging it and plugging it back in after a few minutes.
- If the issue continues, contact a professional technician for control board replacement.
EA0 / EA1 / EA2: Drum Position Sensor Errors
Cause: These errors mean that the drum position sensor is not detecting the drum’s position correctly.
Solution:
- Inspect the sensor for dirt or damage.
- Clean the sensor or replace it if it is faulty.
Tips for Users in London
If you are based in London and your AEG washing machine displays an error code, it may be worth calling a local engineer for a quick fix. Many appliance repair services in London offer same-day service or fixed-price repairs, which can be more convenient and cost-effective than trying to fix the issue yourself. Before contacting a technician, make sure you note down the error code and take a photo of the machine’s display, as this can help them diagnose the issue more quickly.
Maintenance Tips to Avoid Common Errors
- Clean the filter every 3 to 6 months.
- Use the correct detergent for AEG machines and avoid using too much detergent.
- Do not overload the washing machine, as this can put strain on the motor and cause error codes such as E50 or E51.
- Leave the door slightly ajar after each use to prevent moisture build-up and reduce the risk of damp smells.
- If you live in an older London property with low water pressure, consider installing a water pressure booster.
Conclusion
Having a complete guide to AEG washing machine error codes, including causes and solutions, can help you troubleshoot problems more quickly. Whether you enjoy DIY troubleshooting or need professional support in London, this guide is designed to make things easier. If you are unable to fix the issue yourself, do not hesitate to contact a local technician for expert help with AEG washing machine repair.
